In modern social life, work takes up one-third or more of the time. A good office environment can not only make people pleasing, but also open up their minds and improve their work efficiency. Therefore, a good office environment is very important, and choosing good office furniture is also very important. Today, the small series of new thinking office furniture comes to tell you about how to choose office furniture, let's take a look.
![]()
1. Is the office furniture material reasonable?
The new thinking office furniture Xiaobian reminds everyone: different office furniture, surface materials are different. For example, the legs of tables, chairs and cabinets require hardwoods, which are relatively strong and can bear the weight, while other materials can be used for internal materials.
It was found that the wood had insect eyes and foaming, indicating that the drying was not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is flushed, glaring, or tearing, it means that the formaldehyde content in the adhesive is too high and harmful to the human body.
2. Whether the office furniture structure is firm or small, office furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating good quality; if the sound is dumb, there are The murmur of the slaps, indicating that the blinking is not tightly combined and the structure is not strong. The desk and table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on a move, you will twist and sway. If you shake it, it will be nailed and it will take a long time.
The square table, the table, the chair and other legs should have four triangular clips, which can be used for fixing. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.
3, the office furniture four feet are flat, this point is flat on the ground, you know, some office furniture only three legs landing. Take a look at whether the table is straight and you can't bow or collapse. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be straight and straight, and the door should not sag.
4, veneer office furniture seams are not strict, whether it is veneer veneer, PVC or pre-painted paper, we must pay attention to whether the skin is flat, with or without bulging, foaming, seams are not strict.
Look at the light when you check it, and don't see it when you don't. The ash veneer veneer office furniture is relatively damaged, generally only for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. Particleboard veneer office furniture, the ground part must be edged, and the edge banding will absorb moisture, swell and damage. Generally, the corners of the office furniture are easy to be tilted up. When picking, you can use your hands to buckle the corners. If you buckle up, it means there is a problem with the glue.
5, the office furniture edge is flat and the edge is not flat, indicating that the internal material is wet, a few days will seal off. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The office furniture of the plywood bag is nailed with nails. It is necessary to pay attention to whether the nail holes are flat and whether the color of the nail holes is consistent with other places. Usually the nail hole is sealed with putty. Pay attention to whether the putty is bulging. If it is bulged, it will not work. Slowly, the putty will fall out from the inside.
6, the installation of the accessories is reasonable, for example, check the door lock switch is not working; large cabinets should be equipped with three dark hinges, and some can only be installed two; the top three silk, some cut corners, only one screw , use will fall.
7. The paint part should be smooth. The paint part of the office furniture should be smooth and flat, not flowing, not wrinkled, and flawless. The corners are not straight at right angles, and the straight edges are prone to slag and paint. There should also be a paint inside the door of the office furniture, without the paint board being easy to bend and not beautiful.
8, the sofa should sit on the sofa, should pay attention to the surface should be flat, but not uneven; soft and hard to be uniform, but not this piece of hard, that piece of soft; soft hardness should be moderate, neither too hard nor too soft.
The method of selection is to sit down, squat with your hand, flat, and the spring does not ring. If the spring is unreasonable, causing the spring to bite the spring, it will make a sound. Secondly, it should also pay attention to whether the quilting has broken wires or jumpers, and whether the density of the corner teeth is reasonable.
9, the color should be coordinated with the interior decoration white office furniture, although beautiful, but the time is long and easy to turn yellow, and the black is easy to gray, not the picture is beautiful at the time, to the end of the white is not white, black is not black. In general, office furniture that resembles mahogany is not easily discolored.
